- Oct 21, 2009
- 246
- 0
- 16
All prices include shipping to the lower 48, willing to ship elsewhere but rates will be higher. Mounting hardware and other accessories not included unless otherwise stated or pictured.
Dimarzio Air Zone DP 192 Functions perfectly, couple of miniscule scratches only visible from certain angles. Over 8 inches of lead. Standard/Gibson (50mm) spacing - $37
Dimarzio Super 3 (Black) Functions perfectly, ~3.5 inches of lead, enough for a bridge installation. Standard/Gibson (50 mm) spacing - $37
Dimarzio Virtual Vintage Solo DP 404 - Functions perfectly, white cover that is included is grimy and the screw holes have been widened so that it is unusable with pickup mounting screws with small heads (the plastic cover has widened holes NOT the baseplate), but pristine new Dimarzio covers (in a variety of fruity colors) are available for $3 everywhere, so replacement is no problem. ~7 inches of lead - $35
Dimarzio Super 3 (Purple) Mint Condition, has never been installed, no leads have been stripped. Includes original packaging and all contents, Mounting screws, foam, hex pole adjustment tool, and warranty card (blank). F spaced (52mm) - $48
EMG 89 Hardwire Functions perfectly, logo is a bit worn off (about half of it), I can include some wiring but I do not have the push pull pot for volume. Over 9 inches of lead. - $42
EMG 81 Hardwire Functions perfectly, a well loved EMG, has plenty of grooves from long use, and the logo's coloring is entirely worn off. I can include some wiring with this (at the very least a tone and volume pot) Over 6 inches of lead. - $37
EMG 81 Hardwire (very short leads) Functions perfectly, will need extensions for the leads (both are just over an inch) for any kind of installation, tabs have been modified to accept a larger screw (included, as well as the pickup ring), but it is well done and adjustment still works flawlessly. Other than that in aesthetically good shape. I can include some wiring with this (at the very least a tone and volume pot) - $32
Here are my itrader references...
http://www.metalguitarist.org/forum/itrader.php?u=812
http://www.sevenstring.org/forum/itrader.php?u=16838
http://www.talkbass.com/forum/itrader.php?u=138787
I have references on here, harmony central, and rig talk as well. But I believe the above should be sufficient.
Dimarzio Air Zone DP 192 Functions perfectly, couple of miniscule scratches only visible from certain angles. Over 8 inches of lead. Standard/Gibson (50mm) spacing - $37


Dimarzio Super 3 (Black) Functions perfectly, ~3.5 inches of lead, enough for a bridge installation. Standard/Gibson (50 mm) spacing - $37


Dimarzio Virtual Vintage Solo DP 404 - Functions perfectly, white cover that is included is grimy and the screw holes have been widened so that it is unusable with pickup mounting screws with small heads (the plastic cover has widened holes NOT the baseplate), but pristine new Dimarzio covers (in a variety of fruity colors) are available for $3 everywhere, so replacement is no problem. ~7 inches of lead - $35


Dimarzio Super 3 (Purple) Mint Condition, has never been installed, no leads have been stripped. Includes original packaging and all contents, Mounting screws, foam, hex pole adjustment tool, and warranty card (blank). F spaced (52mm) - $48



EMG 89 Hardwire Functions perfectly, logo is a bit worn off (about half of it), I can include some wiring but I do not have the push pull pot for volume. Over 9 inches of lead. - $42


EMG 81 Hardwire Functions perfectly, a well loved EMG, has plenty of grooves from long use, and the logo's coloring is entirely worn off. I can include some wiring with this (at the very least a tone and volume pot) Over 6 inches of lead. - $37


EMG 81 Hardwire (very short leads) Functions perfectly, will need extensions for the leads (both are just over an inch) for any kind of installation, tabs have been modified to accept a larger screw (included, as well as the pickup ring), but it is well done and adjustment still works flawlessly. Other than that in aesthetically good shape. I can include some wiring with this (at the very least a tone and volume pot) - $32

Here are my itrader references...
http://www.metalguitarist.org/forum/itrader.php?u=812
http://www.sevenstring.org/forum/itrader.php?u=16838
http://www.talkbass.com/forum/itrader.php?u=138787
I have references on here, harmony central, and rig talk as well. But I believe the above should be sufficient.
