Recent content by Deathell

any kind of tonal change or gains to be had in flipping it upside down with the slant and mic-ing it on the slanted side which is now facing down?

Deciding between a mesa traditional 4x12 or oversize or roadking. What are some of you guys using nowadays? Your thoughts on them? How is the roadking cab? Slant or straight?

Really great track!! here's mine

Mono everything below 300Hz = collapse everything below 300Hz to mono? I heard a lot about this but never got to how to do it.. Do you put each track into a bus and use some kind of plugin to do this?

Biting the bullet for 16GB RAM so I won't have to upgrade again for the longest time lol

Thanks! I'd do just that!

Yes, re-intonation like what the two guys above me mentioned.. My story is I screwed up my old six string guitar.. was tuning way low like A standard/G standard with 70 gauge being the 6th string.. of course I had to enlarge the string hole on the string post and file the nut but I wasn't so...

Hey guys I'm finally upgrading my PC after six years of never upgrading anything.. Question is about HDD and SSD drive, should I use the SSD to install the OS and DAW and main applications or should I do the opposite? The HDD will be a WD Black. So which method would give me better results...

Guys I sincerely thank you for clarifying, now I totally understood the concept but please walk me thru with Totalmix??? I have been trying this for days, Ok.. so I tried muting going back and forth between Phones 3 and 4 (3/4 are headphone outputs) and it is just muting left or right but not...

Sorry I'm still not having any luck at this.. it is still feeding back like crazy, basically what I want to do is to listen (monitor) the reamp track while playing the DI track so that I can have a chance to tweak knobs on the amp while carefully listening in doing so to blend with other...

As of now I've managed to record the reamped track but I could not monitor the sound of this track at all.. turning on the monitor button in Reaper will produce this sustained ear rape feedback instead of the sound of the recording reamp track. Is anybody here fluent with RME's Totalmix? And...

I've been trying to figure out how to get this to work for hours.. :zzz: I want to send a mono guitar track from Reaper out into the Redeye3D reamp box into my ENGL preamp then out from the ENGL preamp out into the RME Babyface's Input 2 (instrument input on the side of the Babyface, aka Analog...

How would you go about phasing? How do you know when it's in phase or not. Sorry for such question, I'm still newb at this.

This is exactly what I meant by saying it doesn't sound like it should when I load up a saved session. Usually the highs became more fizzy or buzzy like you have experienced and when I reinstate it by selecting the same IRs that I have worked with, it would then sound normal again. Thank you...

I was going to post this same kind of question, anyway how do u guys usually blend the amps? For example, do you set one amp to have really punchy mids and back off the highs and bass, then set the other amp to have this really scooped sound? I tried this before but end up with a really anal...