Recent content by Evenyre

  1. E

    KILLSWITCH ENGAGE

    I have samples from As Daylight Dies. Would you be interested in those?
  2. E

    KILLSWITCH ENGAGE

    Heya. On The End Of Heartache, the Dragon and the Cobra was connected to a Mesa/Boogie Stiletto 4x12, while the 5150 was connected to a VHT Fatbottom 4x12. In addition to the SM57, an AKG C3000 B was used as well. -Cody
  3. E

    My attempt at the As I Laying Dying tone

    For comparison, bro.
  4. E

    My attempt at the As I Laying Dying tone

    Let me know what you think about the tone, as well as the tone similarity! The band is panned to the right, I'm panned to the left. http://www.soundclick.com/bands/page_songInfo.cfm?bandID=979608&songID=8176191
  5. E

    My attempt at the Killswitch Engage tone

    I have a Maxon OD808 in front of the amp, and I totally agree with you. That said, do you think that less master volume and more preamp volume would tighten things up? Or do you think that less preamp and more master would tighten the tone? I think that the gain is set where I like it - tight...
  6. E

    My attempt at the Killswitch Engage tone

    Here's the signal chain that I used: PRS Custom 24 (EMG 81/85 with 18 volt mod) > Maxon OD808 > Voodoo Modified Bogner Uberschall (Revision 2) > Bogner Uberkab > modern Sm57 placed on a Celestion Vintage 30 between where the dust cap and speaker cone meet, one inch off the grill > Presonus...
  7. E

    My attempt at the Killswitch Engage tone

    Okay. So I isolated the guitar (and a bit of the cymbals too :mad:) from the song "Rose of Sharyn", and panned the track hard right. I played my part and panned the track hard left. KSE right, me left. Please disregard the sloppy playing :) Also, tell me what you think - the goods and...
  8. E

    Metal Guitar Tone (Rhythm) - Thoughts?

    Thanks for the feedback, guys! I tried a Lo-Q hump at 2Khz (+3db) and a Hi-Q hump at 4Khz (+2db) and it sounds much more aggressive. In terms of clarity and overall tightness (especially the low-end) where do you guys think it stands? Here was my signal chain for those who were wondering: PRS...
  9. E

    Metal Guitar Tone (Rhythm) - Thoughts?

    Heya, The tone that I'm getting seems a bit lackluster. Any thoughts on how to improve the tone? Also, on a scale of 1 to 10, what would you rate this tone? By the way, the tone is un-eq'd (only a 12Khz LPF), and no compression...