Anyone with a Liquid Saffire 56 - Please Help!

[Melodeath]

I got a Focusrite Liquid Saffire 56 less than a week ago, and have a quick question. It takes the phantom power on channel one about ten seconds to kick in, whereas it's instantaneous on all the other channels. However, I am not sure if my unit is defective, or if this problem was caused by the firmware/driver update.

So,
1) What driver/firmware are you currently using
2) Does the phantom power on channel one fire up instantly like the other channels?

Thanks!

 

[Trondsa]

I am using Firmware version 1244 and the Mix Control 1.3.2, and the phantom on channel one does fire up instantly.

 

[Melodeath]

Thanks for the reply. I'm also running firmware 1244. Turns out the phantom power issue is on both channel 1 and channel 2, and only on FLAT and NEW AGE. That is why I thought it was only on channel 1, b/c at the time of testing, I didnt' realize the emulation mattered, and I had channel 1 on FLAT, and channel 2 on OLD TUBE.


Does your About section tell you the DSP version installed?

 

[Trondsa]

I've got DSP version 1.1:0.1(69).

 

[Melodeath]

Bizarre. I've got the same, but my driver is 1.41b. How could a driver affect phantom power?