Hey guys.
I have had a bass sitting in my room for so long now. it is an Ibanez EDB350 to be exact, a discontinued model which i cannot for the life of me find a wiring schematic ANYWHERE to use as a guide. so my only other option, besides taking it to a store and paying somebody way too much money to do it for me, is to see what you guys have to say about this. I feel like it is a lot more simple than i see it to be, but my only problem is that i have NO IDEA where most of the wires should be connected to D:
Here is a picture of what the inside currently looks like. if its hard to tell, i'll try to explain.
There is a black wire connected to the right side of the input jack which is then connected to nothing (though it looks connected to the battery "port", but it is not). there are 2 other black wires connected from the far right pot, which i presume is a tone pot. one of those wires is also connected to nothing, and the other goes inside the wood of the guitar (not sure where to). a grey wire connects the two appearing pots together. a white wire then goes from the far left pot to the inside of the wood, apparently to the guitar's pickup. also aside, you can see the battery with the red and black wires (assuming those connect to the input jack to provide power) and some yellow chip-like thing with a yellow wire. and there is also one more white wire (not pictured).
I hope this thread is clear enough for some help, as i am SOOOO sick and tired of using my 6 string for tracking BASS GTR riffs. I JUST WANT TO HAVE A FREAKIN WORKING BASS GUITAR AGAIN! if anybody can lend me a helping hand or two, i would be one happy camper
I have had a bass sitting in my room for so long now. it is an Ibanez EDB350 to be exact, a discontinued model which i cannot for the life of me find a wiring schematic ANYWHERE to use as a guide. so my only other option, besides taking it to a store and paying somebody way too much money to do it for me, is to see what you guys have to say about this. I feel like it is a lot more simple than i see it to be, but my only problem is that i have NO IDEA where most of the wires should be connected to D:
Here is a picture of what the inside currently looks like. if its hard to tell, i'll try to explain.
There is a black wire connected to the right side of the input jack which is then connected to nothing (though it looks connected to the battery "port", but it is not). there are 2 other black wires connected from the far right pot, which i presume is a tone pot. one of those wires is also connected to nothing, and the other goes inside the wood of the guitar (not sure where to). a grey wire connects the two appearing pots together. a white wire then goes from the far left pot to the inside of the wood, apparently to the guitar's pickup. also aside, you can see the battery with the red and black wires (assuming those connect to the input jack to provide power) and some yellow chip-like thing with a yellow wire. and there is also one more white wire (not pictured).

I hope this thread is clear enough for some help, as i am SOOOO sick and tired of using my 6 string for tracking BASS GTR riffs. I JUST WANT TO HAVE A FREAKIN WORKING BASS GUITAR AGAIN! if anybody can lend me a helping hand or two, i would be one happy camper
