Here's a 5min mix to test a new pod patch i made

Nope but don't have gearbox or whatever installed.

I can write down the settings tonight after work? it's really simple. No FX.
 
Here's the settings,

Drive - 12 o'clock
Bass - 2 o'clock
Mid - 4 o'clock
Treble - 2 o'clock
Presence - 2:30 :)lol::lol:) o'clock
Volume - Full


Cab - 4x12 Treadplate
Mic - A track of on axis and off axis 57 in each speaker
Room - 50%



That's it really...



BEsides some work with Kjaerhus Golden Audio Channel in sonar with some EQ boosts and cuts...


Mostly (if i remember correctly)

HS at 65hz, 0.5db boost at 100hz, 1.2db cut at 500, 2db cut at 1k, 1.5db boost at 1.5k and a general 6-10k high shelf of about 1db

Compressor wasn't too hard

added in a live room impulse form noisevault's collection in perfect space about 10% wet (just for some air...)

That's about it...
 
Oh yeah, most importantly, Guitar was my Jackson RR pimped out with an EMG 85 in the bridge (only pickup used on this).

And amp was Big Bottom
 
i dont know what i do wrong but i could never put the channel volume at full without lighting up the clip indicator ... i use to run the pod thru usb, could be it the problem of clipping?
 
I also noticied when i run the outs of an entire mix thru the pod usb (phone), playing guitar together, i have to turn down the vol, cuz the clip indicator is more sensitive

*edit* i mean the channel vol
 
Aye, man, it honestly depends.

It's wierd. Sometimes it'll clip, sometimes it doesn't.

I just keep master down and if it clips, i don't notice it :lol:

I run my pod into my interface's XLR inputs so as long as i'm not overloading that, i don't get any noticible artifacts.