So, I'm downgrading my head and cab due to the fact it spends most of its time sitting in a corner not being used very much.
Willing to sell head and cab individually.
Sensible offers considered for both.
Framus Dragon Head
Has been gigged lightly but well looked after, tubes still have a fair bit of life left in them.
A 3-Channel, 100-watt, all-tube amp head. Each of the 3 channels Clean, Crunch and Lead has a 3-band equalizer as well as Gain, Volume and Presence controls. It also comes with an effects loop, an integrated MIDI interface, two switchable Master volumes, a Deep control, and speaker impedance settings of 4, 8 and 16 ohms.
* 100 watts alltube amp
* Valves: 5x ECC 83 by JJ, 4x EL 34 by Electro Harmonix (selected quartet)
* 3 channels (Clean, Crunch and Lead)
* Gain, Bass, Middle, Treble and Presence controls for each channel and Volume control per channel
* Parallel effects loop
* Deep control to set the amount of low end in the power amp stage
* Master 1 and 2, switchable
* Integrated MIDI interface
* 4, 8 and 16 ohms speaker output impedance, switchable
* Weight: 20 kg
* Dimensions (W/H/D): 0,72 x 0,28 x 0,26 m
* Made in Germany
RRP about £1200 if I remember rightly.
Randall RS412XLT100 - Cab
* Straight front
* 4x 12" Custom Celestion G12H-100
* 3/4" void-free birch ply construction
* 29.5"W x 14"D x 29.5 "H
* Powder Coated Metal Grill
* Mic Eliminator XLR Outputs
RRP about £800
Both in good condition, usual cosmetic issues on the cab (ie. a bit of scuff, more pics to come in the next day or so).
Interested then reply or drop me a PM
Willing to sell head and cab individually.
Sensible offers considered for both.
Framus Dragon Head
Has been gigged lightly but well looked after, tubes still have a fair bit of life left in them.
A 3-Channel, 100-watt, all-tube amp head. Each of the 3 channels Clean, Crunch and Lead has a 3-band equalizer as well as Gain, Volume and Presence controls. It also comes with an effects loop, an integrated MIDI interface, two switchable Master volumes, a Deep control, and speaker impedance settings of 4, 8 and 16 ohms.
* 100 watts alltube amp
* Valves: 5x ECC 83 by JJ, 4x EL 34 by Electro Harmonix (selected quartet)
* 3 channels (Clean, Crunch and Lead)
* Gain, Bass, Middle, Treble and Presence controls for each channel and Volume control per channel
* Parallel effects loop
* Deep control to set the amount of low end in the power amp stage
* Master 1 and 2, switchable
* Integrated MIDI interface
* 4, 8 and 16 ohms speaker output impedance, switchable
* Weight: 20 kg
* Dimensions (W/H/D): 0,72 x 0,28 x 0,26 m
* Made in Germany
RRP about £1200 if I remember rightly.
Randall RS412XLT100 - Cab
* Straight front
* 4x 12" Custom Celestion G12H-100
* 3/4" void-free birch ply construction
* 29.5"W x 14"D x 29.5 "H
* Powder Coated Metal Grill
* Mic Eliminator XLR Outputs
RRP about £800
Both in good condition, usual cosmetic issues on the cab (ie. a bit of scuff, more pics to come in the next day or so).
Interested then reply or drop me a PM