TMS_5153_SuperTight

mickrich

Member
Aug 2, 2007
1,753
70
48
Fixed :)
Really tight IR
Apogee Mini DAC>Palmer Daccapo>5153 RTN (pres 11.30, res nearly full)>Recto Cab>57 and 421 on different cones>API

photo.JPG


I think this will be my new default for guide tracks.
Link (free as always)
https://dl.dropboxusercontent.com/u/2133088/TMS_5153_SuperTight.wav.zip

Test with Davidian cover from practice room thread with X50 V2 (power amp off). Hi and Lo pass only.
https://dl.dropboxusercontent.com/u/2133088/TMS_5153_SuperTight_Test.mp3
 
Fixed. Accidentally left channel 2 o my API in reverse polarity :-/.
Link in OP
 
it's way less boomy than most impulses which works great on thermionik duality amp.
 
it's way less boomy than most impulses which works great on thermionik duality amp.

The power amp of the 5153 50wt is very tight.
I suspect that the preamp section pushes a lot of lows that balances this out.
It really reminds me of my Mesa MK4 power amp section which is a very similar setup but you need to boost the low frequency on the graphic.

I must try the 6505 preamp feeding the 5153 power amp.
I suspect it will be much thinner than through it's own power amp.
Will report back when I have time to check this out.
 
Fixed :)
Really tight IR
Apogee Mini DAC>Palmer Daccapo>5153 RTN (pres 11.30, res nearly full)>Recto Cab>57 and 421 on different cones>API

photo.JPG


I think this will be my new default for guide tracks.
Link (free as always)
https://dl.dropboxusercontent.com/u/2133088/TMS_5153_SuperTight.wav.zip

Test with Davidian cover from practice room thread with X50 V2 (power amp off). Hi and Lo pass only.
https://dl.dropboxusercontent.com/u/2133088/TMS_5153_SuperTight_Test.mp3

Hello Mike
You would be too kindly to reupload?
Thank you... ^_^