Hi,i've been looking for equipment to keep my power the cleanest possible at a reasonable price,after searching and reading a lot of posts here i think that Furman can help to solve some problems but not all...for example for voltage regulation all the cheap stuff is useless,there is a voltage regulator,the FURMAN P-1400 AR E (EU version) with all the technologies that furman offers like LIft and all that stuff,i guess it's a good piece of equipment,at least in this post http://www.ultimatemetal.com/forum/andy-sneap/194178-guitars-amps-voltage-v.html#post3776924 Mark says it is a good one (i guess this is the USA version)
But this one it's 1090€ and it's a little bit expensive...
So i've found a Tripplite voltage regulator/UPS that also has some emi/rfi filter and it's cheaper than the furman --> http://www.tripplite.com/EN/products/model.cfm?txtModelID=3983,but i don't know if it's a good choice for audio,i don't know if it can get rid of hum/ground loop problems,actually my main problem is that when i try to reamp FF400 -> Engl e570 se -> vht 2902 -> mesa cab -> sm57 -> FF400 (mogami+neutrik cables) there is a looot of noise going in there,if I plug the guitar directly to the engl there is not much noise,and if i put an Ebtech hum eliminator into the reamping chain the noise is reduced a lot but also the signal is a little bit degraded,not much though...anyway I think that a cleaner power would help a lot to get rid of unwanted noises so if somebody can tell me something about this or some comment about the tripplite stuff would be much appreciated
But this one it's 1090€ and it's a little bit expensive...
So i've found a Tripplite voltage regulator/UPS that also has some emi/rfi filter and it's cheaper than the furman --> http://www.tripplite.com/EN/products/model.cfm?txtModelID=3983,but i don't know if it's a good choice for audio,i don't know if it can get rid of hum/ground loop problems,actually my main problem is that when i try to reamp FF400 -> Engl e570 se -> vht 2902 -> mesa cab -> sm57 -> FF400 (mogami+neutrik cables) there is a looot of noise going in there,if I plug the guitar directly to the engl there is not much noise,and if i put an Ebtech hum eliminator into the reamping chain the noise is reduced a lot but also the signal is a little bit degraded,not much though...anyway I think that a cleaner power would help a lot to get rid of unwanted noises so if somebody can tell me something about this or some comment about the tripplite stuff would be much appreciated
