WTB:EMG volume pot

[motomoto]

Mine broke(never stops spinning)
So if anyone got a spare volume pot for the quick connectors, gimme a pm
Im UK based

 

[Metaltastic]

Pretty certain any 25kOhm pot will do dude!

 

[motomoto]

I found this http://www.thomann.de/gb/gewa_emg_poti.htm
but from the pick i see only three terminals, while the volume pot that came with the pickup has 5(or 6, cant check atm).
Please...... show me the light on the holy path of active pickups

 

[Metaltastic]

All the pots that have come with my EMG's (one guitar that came with them, two others I bought EMG's for later, and they come with pots) have had 3 terminals, so I dunno what to tell ya! 5 or 6 terminals only seem necessary on a push-pull pot...

 

[motomoto]

It's these new bloody emg-x's
I'll try to post a pick of the pot(tomorow probably)
Worst case senario, i'll make a connection 1volume-2tone and leave the second volume just to fill the hole on my LP.
Thanks for the quick response dude

 

[Metaltastic]

No prob. man, good luck!

 

[nwright]

I think the X's can only use the new solderless pots from EMG? I don't see why, though. So you'll have to find a place that sells OEM equipment from EMG.

Here in the states, www.guitarpartsdepot.com is a EMG parts dealer.

Here is a 25 kOhm 6 pin pot, but it's push/pull:

 

[motomoto]

Since i dont have my camera atm, here are the wirring instructions for the X's
http://www.emgpickups.com/content/wiringdiagrams/HX_0230-0110D.pdf

Volume has 6 pins, tone has 5.

Anyways,i wired the EMGs with one master volume and one master tone and left the other 2 just for cosmetic purposes

I realised that the second tone was broken aswell.......SO
if anyone buys a set of Xs and doesnt need the second tone and volume pot pm me.

:Smokin: