So I just wired a cab for the first time and I'm hoping I did it right. I acquired a peavey 412f cab which was rated at 4 ohms with the original speakers. I usually run two cabs, thus rewiring the peavey cab to be 16 ohms to match my other cab seemed like a safe thing to do. I have a set of celestion g12t-75's from another cab that are rated at 16 ohms each that I just put into the peavey because I was unsure of the impedance of the peavey scorpion speakers which were originally in the 412f. I followed a parallel series wiring diagram I found here: http://www.theb9.com/link/1302541122CyrpdEdTfqmdJTeKeNTyFV9t to help me. I'm basically just asking if this diagram is correct and is my cab now safely able to run at 16 ohms? Thanks!
