Digi 003 with spdif AND adat

[AndrewPGlover]

I am trying to run my Digi 003 with my API A2D and PreSonus D8 all at the same time. Is this possible?

I have tried every configuration of slave/master that I can think of and I get a ton of clicking from the D8 or nothing at all.

A friend of mine needs to track a session with all 14 of my preamps tomorrow morning so I am hoping I can figure out an answer for this.

I'm running PT9 on OSX 10.6.2.

Thanks for your help.

 

[egan.]

You need to use at least one BNC cable to do sync in that situation. I would slave the 003 to SPDIF (from the A2D) and then run a BNC from the 003 WC out to the D8 WC in and obviously set the D8 to external sync.

 

[Joshua Wickman]

I run a Rosetta 800 adat and a art digital preamp via spdif all on a 002. The Rosetta has adat in and out though and i run both to my 002. Everything clocks fine here.

 

[egan.]

Josh you should check your setting b/c if you are clocking your rosetta to your 002 and not the other way around then you are handicapping the rosetta by forcing it to use an inferior clock source. Both the Rosetta and the 002 will perform better if the Rosetta is the master.