EMG 89 wiring -- Miniswitch?

[ParsonsMatt]

Hey everyone,

I've got an EMG 89 that I want to wire to a miniswitch, pickup selector, master volume, and then finally the output jack.

Right now I have it all figured out, except for what to do with the white and yellow wires... In a humbucker-only configuration, these two wires are isolated and not used at all. In a push-pull pot configuration, these are paired to the blue/orange wires, but I'm not sure how to get them working with the miniswitch I have (DPDT, 6 lugs, 2 rows of 3 lugs)

Any help?

Thanks!

 

[KillFrenzy]

Don't know if this would be of any help, but I got this pdf straight from EMG tech support:

http://www.4shared.com/file/246440921/39783e1b/1_89_1_EMG_1v_1t_3wt.html

 

[JeffTD]

What kind of switch do you have? It's gotta be DPDT. (6 lugs)

 

[Mancha]

89 is actually two pickups with two separate outputs, so you could wire it just like you would wire a Les Paul`s switch.
That would give you Hum/Hum+Single/Single all in one position.

 

[ParsonsMatt]

Apparently, all I had to do was wire the switch just like the pot..

A friend gave me this wiring diagram:

Thanks for the help

 

[JeffTD]

Apparently, all I had to do was wire the switch just like the pot.

Yeah, a push-pull pot has the switch element entirely isolated from the pot element.