Ok, by a miracle of modern science, and some very good "dumb it down" advice I got on Reaper's forum, I figured out how to import all my old songs that I recorded on Riffworks into Reaper for EQing.
Thanks to forum member CruzControl, I was able to get here,
http://i204.photobucket.com/albums/bb42/Robert7779/eq1.jpg
After some trial and error, I figured out how to apply the high/low passes, at least I think I did .
Here's the original. Linsten to: Shootreaper
http://www.soundclick.com/bands/default.cfm?bandID=1065508
Here's the riff after I cut everything below 100 and everything above 8000. I also cut 1dB at 400 and another 1dB at 550 I think. Listen to: Orange
USE SAME LINK AS ABOVE.
This is my very first try at applying high/low passes, so if you think it sucks, take that into consideration.
You can pretty much get what kind of tone I'm going for, although I'm probably going to tweak the tone a little, and maybe back off on the gain very slightly. Anyways, could someone please give me some advice on where to cut and at what dBs to do so at.
Thanks
Thanks to forum member CruzControl, I was able to get here,
http://i204.photobucket.com/albums/bb42/Robert7779/eq1.jpg
After some trial and error, I figured out how to apply the high/low passes, at least I think I did .
Here's the original. Linsten to: Shootreaper
http://www.soundclick.com/bands/default.cfm?bandID=1065508
Here's the riff after I cut everything below 100 and everything above 8000. I also cut 1dB at 400 and another 1dB at 550 I think. Listen to: Orange
USE SAME LINK AS ABOVE.
This is my very first try at applying high/low passes, so if you think it sucks, take that into consideration.
You can pretty much get what kind of tone I'm going for, although I'm probably going to tweak the tone a little, and maybe back off on the gain very slightly. Anyways, could someone please give me some advice on where to cut and at what dBs to do so at.
Thanks