Ermz
¯\(°_o)/¯
It's essentially a standard 808 schematic with some electrolytics replaced by film caps, and some resistor values and caps interchanged.
Take the standard BYOC schematic and just make these changes:
=--Resistors:
Replace 51K with 20K (less distortion on low settings)
=--Capacitors:
Replace 1NP electrolytics with 1uf film capacitors (improved fidelity)
Replace the .22uf tantalum capacitors with .15uf (improve tone knob)
Optional: Replace .047uf film capacitor with .1uf film cap (reduce mid-hump, add bass)
=---Voltage
Run with a voltage between 9 and 18V for increased headroom.
Take the standard BYOC schematic and just make these changes:
=--Resistors:
Replace 51K with 20K (less distortion on low settings)
=--Capacitors:
Replace 1NP electrolytics with 1uf film capacitors (improved fidelity)
Replace the .22uf tantalum capacitors with .15uf (improve tone knob)
Optional: Replace .047uf film capacitor with .1uf film cap (reduce mid-hump, add bass)
=---Voltage
Run with a voltage between 9 and 18V for increased headroom.