how to reamp with kemper

[manegarm999]

can somebody help me and give me a step by step instructions to reamp with kemper?

im using cubase 7

 

[AboutBlank]

If you haven't, read the whole Kemper Thread, you'll get more info than you need!

 

[JeffTD]

Connect spdif ins/outs, route them in the f4 connections manager, click the input section and select "spdif input" on the Kemper. Done.

I find it strange that you'd have purchased both C7 and a KPA and can't figure this out, if I'm perfectly honest. It's stupid easy.

 

[manegarm999]

let me explain what happened.

yes i can record the dry and wet signal each in 2 tracks mono

The problem its that i can´t configure the sound of kemper patches for listen the dry signal with the kemper amps.


can you detail me more how yo do it please?

 

[bryan_kilco]

Did you consult the manual?

 

[manegarm999]

dont say anything

 

[JeffTD]

Interface spdif out to kpa spdif in. kpa spdif out to interface spdif in. Set up a stereo KPA out and KPA in (just spdif l/r) in your F4 connections manager.

DI track output set KPA left, Reamp track input set to KPA (left or right depending on your output settings, one is DI and one is the amp track for me).

On the profile, push the "input" button, and make sure the box calle "SPDIF input" is checked. That's it.

 

[JeffTD]

And for the record, the manuals do cover this issue pretty specifically.

 

[manegarm999]

yes that part work ok. but i need the signal return to the daw and can change the amps and configurations of kemper using the dry signal to get the best sound to the mix.

 

[JeffTD]

Literally no idea what you're asking. I just told you how to get the DI signal from the DAW into the Kemper and then the reamped, Kemper signal back into the DAW. What else do you want?

 

[kylendm]

I don't have Cubase or Kemper but I think you need to turn on direct monitoring on the track you are recording the reamped signal. Play it back and you should be hearing the what the Kemper is sending in real time.

 

[manegarm999]

Kemper signal back into the DAW. What else do you want? that its the things that not work. how do i need setup the signal to return and record the dry signal with kemper

 

[manegarm999]

I don't have Cubase or Kemper but I think you need to turn on direct monitoring on the track you are recording the reamped signal. Play it back and you should be hearing the what the Kemper is sending in real time.

that dude its that i need to do but i can´t get the amp signal to record changing the configurations of kemper in real time

 

[kylendm]

Try this out. I see you have the button pressed but maybe you missed something.

http://www.youtube.com/watch?feature=player_embedded&v=WSIQO_UmP-g

 

[blue_fAng]

You want to listen to the dry signal? Click the speaker icon to the right of "dry signal" it should turn yellow. Is that what you are asking cause I'm confused too.

 

[kylendm]

I think he wants to hear the wet signal and while listening be able to adjust things so when he goes to record what he hears is what he's going to get. It looks like you just have to press the little speaker button on the wet track.

 

[JeffTD]

Why do you want the dry signal after the Kemper? You want the Kemper'd, reamped signal coming back. AKA the SPDIF out of the Kemper. Just turn on input monitoring (it looks like you already do??) to hear what's coming back out of the Kemper.

 

[kylendm]

Why do you want the dry signal after the Kemper? You want the Kemper'd, reamped signal coming back. AKA the SPDIF out of the Kemper. Just turn on input monitoring (it looks like you already do??) to hear what's coming back out of the Kemper.

Exactly, but in the last picture he has it off.

 

[manegarm999]

http://www.youtube.com/watch?feature=player_embedded&v=ebzPKtEP5pg


see 4:40 minute. THAT i need to do with the dry signal

 

[kylendm]

On the wet track record with input monitoring turned on. Then turn some knobs or whatever to switch between the different amps and shit.