- Apr 20, 2013
- 494
- 9
- 18
New Kontakt Bass Instrument
- Thread starter FrankTheSmith
- Start date
- Apr 20, 2013
- 494
- 9
- 18
Processing info:
D.I.
Bass > Daw
Preset 1
Maxon > Ampeg SVT classic > DAW > SVT 8x10 Impulse > 30% Eq match> EQ > Limiter
Preset 2
Sansamp pedal > Ampeg SVT classic > DAW > SVT 4x10 Implulse > Decapitator > Waves CLA Bass > EQ > Limiter
Preset 3
Maxon > Rat2 > Ampeg SVT classic > DAW > Ampeg VL/Vb4 Impulse Blend > EQ > Limiter
Preset 4
Sansamp pedal > Bugera 6260 matching cab > sm7b - Carvin m68 > DAW > RBass > EQ > Limiter
D.I.
Bass > Daw
Preset 1
Maxon > Ampeg SVT classic > DAW > SVT 8x10 Impulse > 30% Eq match> EQ > Limiter
Preset 2
Sansamp pedal > Ampeg SVT classic > DAW > SVT 4x10 Implulse > Decapitator > Waves CLA Bass > EQ > Limiter
Preset 3
Maxon > Rat2 > Ampeg SVT classic > DAW > Ampeg VL/Vb4 Impulse Blend > EQ > Limiter
Preset 4
Sansamp pedal > Bugera 6260 matching cab > sm7b - Carvin m68 > DAW > RBass > EQ > Limiter
Deadstar
Member
I'd really love to hear a short uncompressed clip with the clean d.i. in order to process it myself and evaluate your product before buying it
grywolf627
Member
- Apr 20, 2013
- 494
- 9
- 18
AboutBlank
Member
Awesome thing.
Really like it!
But as a Kontakt noob I'm not able to set up these KeySwitches...
Do you have any link to useful content about that, I searched for some time on YT(and in the manuals) and haven't found anything clearly described "how to", for this rather simple stuff
Really like it!
But as a Kontakt noob I'm not able to set up these KeySwitches...
Do you have any link to useful content about that, I searched for some time on YT(and in the manuals) and haven't found anything clearly described "how to", for this rather simple stuff
- Apr 20, 2013
- 494
- 9
- 18
- Apr 20, 2013
- 494
- 9
- 18
Full screen and put it in HD.
The keyswitching is the lower midi notes.
first one is slide up fast, then slide down slow, right into alt picking.
I keep putting the alt picking midi note before the group of fast notes to ensure the first accent note is a down pick (just like a person would do)
When there's a slow part that a person would only down pick you'd draw in a midi note for down pick only.
You always want to draw the midi keyswitch notes right before the note. So like a 64th note right before. or 32nd note.
To make it easier I'd suggest always having it on alt pick when your making the midi track. Then once it's done go in and draw the keyswitch midi.
If it's too vague and shitty I can hook up a mic and go more in depth with it.
The keyswitching is the lower midi notes.
first one is slide up fast, then slide down slow, right into alt picking.
I keep putting the alt picking midi note before the group of fast notes to ensure the first accent note is a down pick (just like a person would do)
When there's a slow part that a person would only down pick you'd draw in a midi note for down pick only.
You always want to draw the midi keyswitch notes right before the note. So like a 64th note right before. or 32nd note.
To make it easier I'd suggest always having it on alt pick when your making the midi track. Then once it's done go in and draw the keyswitch midi.
If it's too vague and shitty I can hook up a mic and go more in depth with it.
Last edited by a moderator:
Kaleb Formz
Member
- Aug 27, 2013
- 77
- 0
- 6
- Apr 20, 2013
- 494
- 9
- 18
A pack of .175 strings is like 75$, so I just went with a .135 and the lowest note I recorded was a low A. Kontakt pitch shifts it pretty good to an F though.
If I can find some raw mixing tracks of a decently recorded and performed song in F I could make an example.
If I can find some raw mixing tracks of a decently recorded and performed song in F I could make an example.
AboutBlank
Member
Thanks a bunch man, the tut was enough to make it work here. Was so confused that I was in Kontakt fiddling around the group stuff in the instrument 
Now it works like a charm and it's really awesome.
How do you work out bends(out of curiosity), with the pitch wheel and then exporting(or automating)?
Thanks for the vid, helped a lot!
Now it works like a charm and it's really awesome.
How do you work out bends(out of curiosity), with the pitch wheel and then exporting(or automating)?
Thanks for the vid, helped a lot!
- Apr 20, 2013
- 494
- 9
- 18
You could either draw the automation in the midi file, or assign the pitch wheel to a midi controller and write the automation on the track, or bounce to audio and put on a pitch shifting plugin and automate that.
This is drawing the automation in the midi file.
You can control the over all amount of bend by clicking on the mod drop down and moving the slider to the amount of notes you want it to be able to bend it.
You can bend it up to an octave, but don't do that haha.
This is drawing the automation in the midi file.
You can control the over all amount of bend by clicking on the mod drop down and moving the slider to the amount of notes you want it to be able to bend it.
You can bend it up to an octave, but don't do that haha.
Last edited by a moderator:
AboutBlank
Member
AboutBlank
Member
Thanks man, you rule
It sounds indeed awesome!
A lot more versatile then the competitors I know:Spin:
Sry for double.
It sounds indeed awesome!
A lot more versatile then the competitors I know:Spin:
Sry for double.
AboutBlank
Member
Jo,
Set the Keyswitch in Kontakt(the tool icon) to alternate.
It starts with slides(the default key switch)...
Or draw the keyswitch in before your Basspart starts
Set the Keyswitch in Kontakt(the tool icon) to alternate.
It starts with slides(the default key switch)...
Or draw the keyswitch in before your Basspart starts
Deadstar
Member
Bought it after a quick test but it seems like that mediafire link is not working. I Pm'd ya anyway
Similar threads
