Axe FX ground loop issue (only when on desk)

[Flow Of Time]

As some of you might have read, I had this ground loop issue, when connecting my Axe FX to the Poweramp of the Orange OR15. I partially solved the problem now, by putting the axe fx on the amp instead of running a cable from the axe (on the desk) to the amp.

Anybody got a solution how I could put the axe back on the desk, without the ground noise? It's pretty annoying to tweak patches without Axe Edit, sitting on the floor..

 

[egan.]

Are they plugged into the same outlet? Did you try lifting the AC ground on one of the units as I suggested in the last thread?

 

[Flow Of Time]

No, they're connected to seperate outlets, when the axe is on the desk. I'll try if that's causing the problem, if so it wouldn't be that hard to fix, I guess
Yes, I discovered that the axe has a ground lift switch and tried that, but it didn't work.

 

[Matt-Steele]

I've never had any problem of the sort. Possibly because I run my Axe from a Furman power conditioner. I have ZERO noise issues. I also use Mogami cables. Couldn't hurt to ask at the Fractal website. Maybe someone there has experienced the issue?

 

[Flow Of Time]

Okay it works when on the same outlet! Thank you guys