So I'm having latency problems trying to use Ozone 3 on my drum buss with the eq, limiter, multiband, and widener engaged all at once... I get a delayed phasey reverby problem on the drums... Ive tried lowering the buffers and that didnt help much... and Even when I tried to bounce the drum buss track it will print with the same phasy latency problem... Any other ideas on what I could do solve this problem?? Im running Audition 3 and already have about 20 + tracks with a goood amount of plugs all frozen... I never have any latency problems with any other plugs and Ive used Ozone fine on the master bus before as well without any latency... I suppose I could try to take off all the plugs except for the drums and see if that helps and print the drum buss track then.... But Ozone 3 is pretty killer on the drum bus as long as you dont send your cymbals/overheads to it and stay away from the exciter as much as possible...
Latency with Ozone 3 when used in mix on drum bus??
- Thread starter MarcusD777
- Start date
Ozone is a CPU hog, IMO, so it'll always have a bit of latency. the only thing I'd know to do at this point is to print and then scoot it until it's lined up with the actual drum tracks.
