Metalcore Mix

This is a band I recorded over the past couple days.
It's my first time officially adding synths, choirs, and strings to a mix.
There are just two parts of the song where I put them in, although in the part towards the end of the song I had some trouble trying to get the textures to sit well in the mix.
Here you go:)
Any and all feedback is appreciated!
Thanks

Updated Mix:
http://dl.getdropbox.com/u/767557/A Structure, An Offering.mp3
 
  • Like
Reactions: rickdtaw
no problem
I used a Pod for guitars
diamond plate head with the treadplate 4x12 cab and condenser mic
used the screamer with 0% drive, 40% gain, and 60% tone
highpass and lowpass at 60hz and 12khz
cut a lot of 4khz and some 800hz and then used a harmonic exciter to brighten up the tone a bit.
used a limiter to make the guitars sound bigger, as they were only double tracked.
That's about it:)

I'll be posting an updated mix soon:)
 
no problem
I used a Pod for guitars
diamond plate head with the treadplate 4x12 cab and condenser mic
used the screamer with 0% drive, 40% gain, and 60% tone
highpass and lowpass at 60hz and 12khz
cut a lot of 4khz and some 800hz and then used a harmonic exciter to brighten up the tone a bit.
used a limiter to make the guitars sound bigger, as they were only double tracked.
That's about it:)

I'll be posting an updated mix soon:)

any chance on getting the preset?

nice mix very high quality. what did you use for drums?
 
The kick seems really buried, no real low end kicking my balls like i would expect.

Guitars seem kinda hot, but that might just be me. Or being used to Joey's mix of tdwp.