Hi! this is a new demo that I recorded to test mi 5150 using a Hot Plate used as a dummy load. I noticed that when I connect mi 5150 to the Hot Plate, the amp have less gain and I need to turn up to 7 (I don't know if it's really due to the Hot Plate, or it's a problem of preamp tubes).
I recoderd 4 guitar:
2 guitars --> panned 100L - 100R --> Inch off Edge-1 impuses
2 guitars --> panned 80L - 80R --> DSS3 Impulses (Mesa 4x12 - SM57 Pres 8)
All guitars with the same post eq:
HI pass at 60Hz - LOW pass at 12KHz
Big cut in 450 Hz (about -4 dB)
Cut at 800 Hz (-2 dB)
C4 with Andy Sneap preset.
Increase a bit at 5 KHz (1,5 dB)
http://www.soundclick.com/bands/page_songInfo.cfm?bandID=790227&songID=6622603
I recoderd 4 guitar:
2 guitars --> panned 100L - 100R --> Inch off Edge-1 impuses
2 guitars --> panned 80L - 80R --> DSS3 Impulses (Mesa 4x12 - SM57 Pres 8)
All guitars with the same post eq:
HI pass at 60Hz - LOW pass at 12KHz
Big cut in 450 Hz (about -4 dB)
Cut at 800 Hz (-2 dB)
C4 with Andy Sneap preset.
Increase a bit at 5 KHz (1,5 dB)
http://www.soundclick.com/bands/page_songInfo.cfm?bandID=790227&songID=6622603