- Feb 20, 2005
- 19,930
- 1
- 36
Well I'll preface this with a disclaimer - I consider myself decent at soldering, and have made a few speaker/XLR/TRS cables in the past, and I'd like to think I have a pretty firm grasp of signal flow in a studio environment. That said, guitar wiring COMPLETELY mystifies me (mostly because of the quantity of wires, though also because I don't know what the signal path is), so if any of you guys could give me a tutorial as to how to wire the cavity below, I would really appreciate it! Here's the pic:
All I want connected is the two Duncan humbuckers (JB Jr. & Custom 5), the black ground coming from the top of the cavity, one volume pot (the one on the left), one three way toggle, and the mono output jack - the other pot is just there to fill the hole in the guitar body, and I don't want any coil tapping or any of that nonsense. Help?

All I want connected is the two Duncan humbuckers (JB Jr. & Custom 5), the black ground coming from the top of the cavity, one volume pot (the one on the left), one three way toggle, and the mono output jack - the other pot is just there to fill the hole in the guitar body, and I don't want any coil tapping or any of that nonsense. Help?