How do i send both rhythm (clean) tracks to a new channel keeping there panning, so i can put fx on both at once?
Reaper routing
- Thread starter elapidae1
- Start date
You could either put both in a parent folder and put the effects on the parent track or you could add a send on both to your fx track and on that send set the panning appropriately.
John_C
formerly Skeksis268
LeSedna
Mat or Mateo
yeah I don't even get the question.
If you had tried it, you would have discovered in 5 seconds it works with no problem.
If you had tried it, you would have discovered in 5 seconds it works with no problem.
SEND/RECEIVE
click the little 'i/o' button on your FX channel - which will be the RECEIVE. You then just use the drop down menu to select which tracks are going into the RECEIVE channel. done. [ding]
Well i did try it before posting. But the fx were there but the panning was not? I recorded 2 tracks in mono with there panning set, then sent them to another track with the fx on it
John_C
formerly Skeksis268
Ionei
Member
As i said i can do it, but it it will only let me pan the recorded tracks to one side. When i pan to the other side there is nothing there.
darthjujuu
Member
problem = there are mono plugs, and there are stereo plugs. on the individual guitar tracks themselves, you must ensure you are using mono plugs. on the folder track (and use a folder...don't bother with routing) you must use stereo plugs. reaEq / reaComp just figure it out themselves.
if you're using ampsims, you must use an individual sim on each mono track.
so you have
[Folder track] panned center, with reaEq and that's really all you need. but any plugz here must be stereo plugs.
[guitar L] with ampsim, panned left, anything else must be a mono plug
[guitar R] also with ampsim, panned right, ditto
if you're using ampsims, you must use an individual sim on each mono track.
so you have
[Folder track] panned center, with reaEq and that's really all you need. but any plugz here must be stereo plugs.
[guitar L] with ampsim, panned left, anything else must be a mono plug
[guitar R] also with ampsim, panned right, ditto
