JeffTD
Senhor Testiculo
Please learn to use ellipses properly. One of them is a real amp. E tuning with EMGs and no real chugs; it's bound to be more stiff and less dynamic than tones you're into via 8 strings.
Kemper Profiling Amp
- Thread starter Genius Gone Insane
- Start date
Kazrog
Kazrog, Inc.
I've been watching this whole aliasing debate a bit from the sidelines - as a developer, it's interesting to me. I have a lot of respect for the innovation of both Fractal and Kemper in the hardware amp modeling space, and I've tested all of their respective products personally with good results.
I will add to this thread that everything that Cliff and Christophe have said from a technical perspective is 100% accurate, for what it's worth. In other words, less aliasing = more CPU load required. It sucks to see DSP engineers fight, this is a small industry and we all work hard at what we do.
I will add to this thread that everything that Cliff and Christophe have said from a technical perspective is 100% accurate, for what it's worth. In other words, less aliasing = more CPU load required. It sucks to see DSP engineers fight, this is a small industry and we all work hard at what we do.
egan.
daylightdies.com
Kazrog
Kazrog, Inc.
When can we expect the recabinet rack unit?
No plans to enter the hardware space at this point, but there are some more Kazrog software products on the horizon.
jipchen
ForesterStudio
Bought a Tech21 MIDI Moose yesterday and I'll probably get a "Camplifier" unit soon.
Two german engineers developed a retrofittable power-amp unit for the Kemper: http://www.kemper-amps.com/forum/index.php?page=Thread&threadID=6629&pageNo=1
Prices seem decent, too. Can't wait to test the Camplifier 180.
Is anyone here already playing the KPA live? If so, with what setup (poweramp (if any), footswitch, etc) and experiences?
Two german engineers developed a retrofittable power-amp unit for the Kemper: http://www.kemper-amps.com/forum/index.php?page=Thread&threadID=6629&pageNo=1
Prices seem decent, too. Can't wait to test the Camplifier 180.
(-19% for countries outside the EU)
Is anyone here already playing the KPA live? If so, with what setup (poweramp (if any), footswitch, etc) and experiences?
I play my Kemper live through the power amp section of my marshall jcm2000 by using the return input of the FX loop. Works perfect! It just sucks to take this heavy amp with you all the time, so I'm really looking for a smaller and lighter power amp solution.
could you not just use the whole modelling stuff inside the kemper(amp+cab+mic), and get a lowweight class D amp with SMPS and a full-range cab and play it with line-signal into the class-D amp? they are very lightweight those days...
ArthurD
Member
drawnacrol
7Slinger
ArthurD
Member
JeffTD
Senhor Testiculo
The metal amp pack has a lot of stuff in it - you'll have to audition the profiles first but there are some absolute gems in there. The JSX and Krank in particular rule. In the next week or so I'll be making the "official" clips for Andy with these profiles used in context of a mix.
Definately gonna have to pick this up after work. I sold my 5153 and my dual rec so hoping those are accurate in this pack.
Plus the NATAS should be interesting to try out.
Plus the NATAS should be interesting to try out.
ArthurD
Member
ArthurD
Member
Doing reamps right now.
This pack rules. IT IS BROOTAL
Unfortunately there is no much info about what cab or channel was used on each profile.
There is no info about the use of a TS.
RECTO profiles are great, but the KRANK just screams.
I'll try the Natas soon.
Clips comming tomorrow (Narco =P)
TonyS.
www.SoundCollab.com | www.risingstorm-music.com
I don't know if this was allready asked, but how is the quality of the analog splitter?
Plan is to go straight into the KPA for monitoring and tracking the DI-Out for later reamps.
Actually I'm going straight into the interface and use Lepoulin stuff for monitoring.
Plan is to go straight into the KPA for monitoring and tracking the DI-Out for later reamps.
Actually I'm going straight into the interface and use Lepoulin stuff for monitoring.
Also, as the S/PDIF out is a stereo connector, is it possible to have one of the channels with the profile sound and one of the outputs with dry DI signal, for possibility to re-amp later on? would be nice to be able to skip the whole DA/AD route for this..!
