Peavey Triple XXX Kemper Profile - (Universal Audio Twin Finity ,i5, SM57, TLM 103)

[Icem4n]

Hi guys!
This is a demo of our latest profile, ENJOY


The profile was made using:
Preamp:
-Universal Audio Twin Finity

Cabinet: ENGL 2x12 v30
Mi'ced with:
-Shure Sm57 on axis
-Audix i5 off axis
-Neumann TLM 103 on axis

Reamped original song by Ola Englund, guitars DI from his Deluxe Edition

 

[Joseph-IS]

very very nice profile!
can you explain how you managed the signal routing for 3 mics into the kemper?

 

[Frantick]

He plug in all 3 of them to a mixer and send a sum to kemper

 

[Icem4n]

This is the signal chain used

Mics > UA Twin Finity > Focusrite Liquid Saffire 56 IN > Cubase 7 > Kemper In

Kemper Out > Maxon OD808 > Peavey XXX input

 

[Deathprayer82]

maxon after the amp and mics??

 

[Joseph-IS]

maxon after the amp and mics??

that's sounded strange to me too.
i read somewhere that the best placement for an overdrive it's between kemper out and amp in during profile process, not between guitar and kemper in (dunno why).

however, thanks for the reply
i'm gonna profile my Krank Rev+ asap and i'll share some sounds with you guys.

cheers

 

[Deathprayer82]

that's sounded strange to me too.
i read somewhere that the best placement for an overdrive it's between kemper out and amp in during profile process, not between guitar and kemper in (dunno why).

however, thanks for the reply
i'm gonna profile my Krank Rev+ asap and i'll share some sounds with you guys.

cheers

looking forward to this! As soon as we find the time, a friend of mine and i will do some JVM, 5153 profiles with different cabs/mics and mic preamps as well!

 

[Icem4n]

Wrong signal chain, the OD is just before the amp, i failed thinking about the wiring in my mind the Output signal chain used was this
Kemper Out > Maxon OD808 > Peavey XXX input

then the mics, preamp, interface, cubase and kemper back