Switching problems with 5150 II

[Forbiddenevil]

Hi,

I want to know how can I switch my amp by pressing only one time on the board!?!

The setup:

Peavey 5150 II with Hush pedal and Delay/reverb pedal.

I need ----> Distortion sound (lead channel) with Hush in the fx-loop

and than Clean sound without Hush but with Delay/reverb

and that with only one click on the floorboard.

Hope someone can help me und understand that!!! The problem is the f**king midicable from amp to footswitch, I think.

Cheers
Alex

 

[WITH FULL DISTORTION]

Please.. i ´m sure it´s a offtopic question.. but since YOU have a 5150 II and many people here has the 5150 I and i´mwilling tobuy the 5150 I
can you or anybody else point me the differences between these2 models?
I´VE HEARD THAT THE 5150 ii IS BRIGHT than the I.

 

[JeffTD]

http://fjamods.com/5150vs5150ii.html


As for the original question... you can't do that. Unfortunately, you'd need to rig up some sort of bradshaw type rig for that. That, or get an amp with 2 effects loops that are both switchable individually, or assignable to each channel.

 

[guitarguru777]

Theres no way to do it unless you get a MIDI switching system like the bradshaw or rockman midi octopus.

Da Fukn Guru

 

[Genius Gone Insane]

can't you get a splitter and rout one side to the hush and the other to the delay?

 

[kaomao]

you can use a switcher, something like this
http://www.advancetubetech.com/eng/LS42.shtml
Ask your guitar shop if they have audio router/switcher

Maurizio

 

[Forbiddenevil]

you can use a switcher, something like this
http://www.advancetubetech.com/eng/LS42.shtml
Ask your guitar shop if they have audio router/switcher

Maurizio

Thanks Maurizio for the link. I told them my switching problem and hope they write back soon. The problem is that the 5150 II has no 1/4" jack for channel change.

Alex

 

[Forbiddenevil]

can't you get a splitter and rout one side to the hush and the other to the delay?

I don't know!!!

I only want to play guitar and not dancing on the pedals

 

[kaomao]

Thanks Maurizio for the link. I told them my switching problem and hope they write back soon. The problem is that the 5150 II has no 1/4" jack for channel change.

Alex

I think they've made a 7 pins cable (midi style jack) to 7 single cables, so you can switch with this cable.

Maurizio

 

[Forbiddenevil]

I think they've made a 7 pins cable (midi style jack) to 7 single cables, so you can switch with this cable.

Maurizio

I hope! Do you know the price of the switcher LS42???

Alex