Would be too much to ask that someone with of Torpedo Live, load here a sound sample with only the sound of his head (PowerAMP Valve + Preamp Valve), drawn THROUGH the Torpedo Live, but use this only as a load box and without the simulation cab of Torpedo of the way Djabthrash said:
-Originally Posted by Djabthrash
@alquiistas : you should read the user manual, which is available on the Two Notes website :
http://www.two-notes.com/wp-content/...rpedo_Live.pdf
Here's what i've seen :
"Plug your 8 ohms out on your amplifier to the SPEAKER input of the TORPEDO Live. (...) Connect the S/PDIF OUT of the TORPEDO Live to the S/PDIF IN of your audio interface. (...) An S/PDIF signal contains two audio channels. The TORPEDO Live is a mono unit, so we decided to give
a great feature : sending the WET signal (with miking simulation) through the LEFT channel and the DRY signal
(without miking simulation) on the RIGHT. This way you can record the dry and wet signal simultaneously. Use
the WEt signal to play as usual, and the DRY signal from the amp"
"The THRU, S/PDIF and LINE outputs can be used simultaneously."
It also says you can bypass the poweramp and miking (cab/mic/mic positioning) sections :
"You will find three modules in the EDIT mode (Power Amp, Miking
and EQ), followed by the output volume of the preset (this volume
setting is saved with the preset, so you can adjust the levels in order
for the presets to be at comparable volumes).
You will see on the first line of the screen the module name and its current state (On, Off, level in dB for the
OUTPUT LEVEL)"
EDIT : so to me it seems you can do all that you need with the Torpedo live : use it as a loadbox only (with the poweramp and miking (mic/cab/mic placement) sections bypassed, and record the signal out of your poweramp out through it (and you can even record a "wet" (with poweramp and/or miking sections activated) signal on the other channel at the same time)
Thank you.
