Celestion T75 Impulse Responses, PODxt and 5150

I wish I still had the project file for the 5150 clip. I had to reinstall my opertaing system and I forgot to back that one up. From memory here's how I did it. There's definitely only 2 guitar performances. One left 95% and one right 95%. But each performance in cloned once and processed with a different impulse response. Look at post #30 for the impulses I used. Then all the guitar tracks were bussed to a group channed, then EQ'ed with a Q10, then limited with an L2 or L3 with about 4dbs chopped off on palm mutes.
 
As I understand it, that's not really the point of impulses. It's kinda like an extension of reverb, so you can't simulate an amp as such.

I think the way to look at it is this: those impulses are how the ROOM sounds with that cab in it, not how the CAB sounds - and the room will sound the same (pretty much) regardless of the cab/amp settings.

Steve
 
Great IR's! Thank you very much!!!:kickass:

Here is my attempt to make some sound clips with your impulses
and with that free kickass vst amp "Juicy" I'm using "reaper" as a DAW for these .


http://nalbantov.muzikant.org/5150_2.mp3
http://nalbantov.muzikant.org/5150_Solo.mp3
http://nalbantov.muzikant.org/5150new.RfxChain
the last file is track-chain preset
here are the plugins
http://nalbantov.muzikant.org/AutoGate_st.dll
http://nalbantov.muzikant.org/5150/Juicy77.dll
http://nalbantov.muzikant.org/5150/TSS.dll
http://nalbantov.muzikant.org/StudioVerb.dll
and Voxengo PristineSpace

regards
Dimitar
 
the effects send of my 5150 combo into my audiophille sound card does not work....WTF

edit: Works but the level is very low....what level did you have the amp set at? I hear the efx loop is post gain dependent...
 
blackbird said:
Great IR's! Thank you very much!!!:kickass:

Here is my attempt to make some sound clips with your impulses
and with that free kickass vst amp "Juicy" I'm using "reaper" as a DAW for these .


http://nalbantov.muzikant.org/5150_2.mp3
http://nalbantov.muzikant.org/5150_Solo.mp3
http://nalbantov.muzikant.org/5150new.RfxChain
the last file is track-chain preset
here are the plugins
http://nalbantov.muzikant.org/AutoGate_st.dll
http://nalbantov.muzikant.org/5150/Juicy77.dll
http://nalbantov.muzikant.org/5150/TSS.dll
http://nalbantov.muzikant.org/StudioVerb.dll
and Voxengo PristineSpace

regards
Dimitar

That sounds great! I'm glad you like the impulses. I download that amp sim and I love it. Nice job.
 
cameltoe said:
the effects send of my 5150 combo into my audiophille sound card does not work....WTF

edit: Works but the level is very low....what level did you have the amp set at? I hear the efx loop is post gain dependent...

You're gonna need a preamp. For the 5150 I plugged the output into my MPA pre. The PODxt out I just plug straight into the audiocard.
 
With that Juicy amp sim, do you find it's a bit hard to get gain out of it? I have to crank the pre gain to max and the lead input to max, and even then it has more of a twangy saturated sound, almost like I'm distorting single coil.
 
Moonlapse said:
With that Juicy amp sim, do you find it's a bit hard to get gain out of it? I have to crank the pre gain to max and the lead input to max, and even then it has more of a twangy saturated sound, almost like I'm distorting single coil.

Download the tubescreamer plugin, run it before the amp sim and your problems are solved.